|
| | | | There are many articles on how to dual boot Vista and XP, but I want to dual
boot Vista and Vista, with an existing installation, on 2 Hard Drives.
Currently I switch these in the BIOS, but I'd much rather chose at a later
stage, can this be done?
Why? Because I keep one of the drives for random software that I rarely use.
|
| |
| | | | | Post in reply to: Nigel Molesworth
Simply install Vista on the second hard drive and you will have a dual boot
menu at start up. You can do it from the original Vista's desktop if both
Vistas are 32bit or both are 64bit. There are no tricks. You just do it.
Of course you need to have two product keys, but I'm sure you realize that.
|
| |
| | | | | Post in reply to:
On Thu, 19 Jun 2008 08:41:26 -0600, "Colin Barnhorst"
Nope, no menu.
Nope, and don't be silly.
|
| |
| | | | | Post in reply to: Nigel Molesworth
I have dual booted XP and Vista on two separate hard drives; I've even
installed the same scenario on two separate partitions and on 'every'
occasion I have had a dual boot menu.
Why is Colin being 'silly' as you put it? If you are running Windows XP and
Vista (or any other combination for that matter) you will require the
appropriate licences.
--
--
John Barnett MVP
Associate Expert
Windows Desktop Experience
Web: http://xphelpandsupport.mvps.org
Web: http://vistasupport.mvps.org
The information in this mail/post is supplied "as is". No warranty of any
kind, either expressed or implied, is made in relation to the accuracy,
reliability or content of this mail/post. The Author shall not be liable for
any direct, indirect, incidental or consequential damages arising out of the
use of, or inability to use, information or opinions expressed in this
mail/post..
|
| |
| | | | | Post in reply to: Nigel Molesworth
Because when you attempt a second activation of a product key you will get a
message that the pk is already in use.
|
| |
| | | | | Post in reply to:
On Thu, 19 Jun 2008 10:00:16 -0600, "Colin Barnhorst"
It's exactly the same hardware, the second activation went through with no
problems.
|
| |
| | | | | Post in reply to:
On Thu, 19 Jun 2008 16:17:39 +0100, "John Barnett MVP"
If I boot with both drives enabled, it just boots from the first.
I'm running Vista on two hard drives, one at a time, on the same computer.
The second install activated with no problems. One drive is effectively a
backup of the other, without the random junk.
|
| |
| | | | | Post in reply to:
On Thu, 19 Jun 2008 09:17:36 +0100, Nigel Molesworth
Use the bootrec /rebuildbcd command.
|
| |
| | | | | Post in reply to: Nigel Molesworth
For the installer to make a dual-boot menu, it has to see
the other pre-existing OS, so both hard drives have to be
connected when the 2nd OS is being installed on the 2nd HD.
*TimDaniels*
|
| |
| | | | |
"Nigel Molesworth" argued.
Nigel, don't argue. Colin et. al. are arguing legalities
and MS's undocumented period of expiration of telephone
activation requirement. Legalities you're not interested in.
The period in which activation requires a call-in is 120 days
since the last installation, according to folklore. Otherwise,
the activation is done automatically.
*TimDaniels*
|
| |
| |
|