|
| | | | I have a Vista Home Premium operating system.
HP tells me there is no compatable driver to use between Vista and the above
scanner. Therefore buy a new scanner! Strange
Any suggestions please
Thanks
Ian Carpenter
|
| |
| | | | | Post in reply to: Ian & Lynn Carpenter
Not much you can do....
buy a new scanner....
or leave that scanner on your old XP computer.
--
Vista Home Premium 32 SP1
http://get.live.com/wlmail/overview
|
| |
| | | | | Post in reply to:
On Fri, 11 Apr 2008 10:21:00 -0400, "Ian & Lynn Carpenter"
It's not really strange at all. I don't know your particular scanner
or how old it is, but when a new operating system comes out, each
peripheral vendor decides for himself which existing products to write
new drivers for.
It's primarily a matter of economics. If the scanner is a recent one
and still being sold, it's obviously in the vendor's interest to
provide the needed driver. The older the product, the less likely it
is that the vendor will write the driver. It just isn't worth it to
him.
--
Ken Blake, Microsoft MVP - Windows Desktop Experience
Please Reply to the Newsgroup
|
| |
| | | | | Post in reply to: In article , Ian & Lynn Carpenter
What version of Windows are you using it on at present, or have you been in the
past? If XP then get the latest versions from:
http://h10025.www1.hp.com/ewfrf/wc/softwareList?
os=228&lc=en&cc=us&lang=en&product=59968&dlc=en
There's a main download and an update.
If you have any HP software that you have tried uninstall it using Remove
Programs and then disconnect the USB cable from the PC end and install the XP
software as follows:
Locate the downloaded file ps804en.exe 1/1 (70.62M) on your computer, Right
Mouse Click on it and select Properties / Compatibility TAB.
On that TAB, check Use Compatibility mode and set it to XP with SP2 and also
check lower down the [x] Run as Administrator and OK your way out.
Do not connect the device until the installation procedure tells you to or
until you get to Finish.
Then repeat the procedure on the downloaded update file ps803mu.exe 1/1
(373.11k) although you can leave the USB cable connected unless it tells you
otherwise.
Hopefully that might work .....
I'm using a very old HP SJ5P scanner in this fashion although it is scsi
connected.
|
| |
| | | | |
Fantastic. Great tech tip. S20 Scanner now works ok.
Thanks again.
--
bazmcbride@hotmail.c
------------------------------------------------------------------------
bazmcbride@hotmail.c's Profile: http://forums.techarena.in/members/bazmcbride-hotmail-c.htm
View this thread: http://forums.techarena.in/vista-print-fax/949307.htm
http://forums.techarena.in
|
| |
| | | | |
Using Windows 64. Have followed HUWYNGR suggestions, but when go to
properties there is no "compatability" TAB. Unable to successfully
complete installation. Have been using S20 on xp with no problem, but
need to switch to the new computer.
--
sheathelm
------------------------------------------------------------------------
sheathelm's Profile: http://forums.techarena.in/members/97469.htm
View this thread: http://forums.techarena.in/vista-print-fax/949307.htm
http://forums.techarena.in
|
| |
| | | | |
I have an HP Photosmart S20 operating on Windows XP. I just downloaded
the software but I cannot get a connection with the scanner. Any
suggestions?
JBL
--
JBL
------------------------------------------------------------------------
JBL's Profile: http://forums.techarena.in/members/151785.htm
View this thread: http://forums.techarena.in/vista-print-fax/949307.htm
http://forums.techarena.in
|
| |
| | | | | Post in reply to: JBL
HP has no Vista drivers for this unit
|
| |
| |
|